This board offers a comprehensive solution for driving a LED chain.
Features:
- Wide 5-36VDC input voltage range.
- 2-60V LED chain drive.
- Programmable switching frequency.
- LED current resistor-programmed.
- Dimensions: approx.45.5 x 33.5 x 10 mm (L x W x H).
- Has over-voltage protection.
- Easy dimming control via PWM, analog voltage or external potentiometer.
- Smoothed drive…..so suitable for photographic/ robot vision application.
- Convenient JST XH and PH connectors.
- M3 mounting positions
- Made in England.
PINOUTS:-
P1 P2 P3
1 +Vled 1 conin 1 +Vin
2 0V 2 DCTL 2 0V
3 +Vin 3 0V
(P1,P2,P3 pin 1 is the square pad)
(R6, R5 potential divider set output overvoltage shutoff to 46.6 V)
CONIN ACTIVE RANGE=0.4 TO 2.4 V (MIN TO MAX BRIGHTNESS)
(Analog or PWM input to P2 pin1)
N.B. Led string max voltage for this board=45VDC
LED chain current(Max.)=0.19/R3
or R3=0.19/LED chain current(Max.)
so for….
LED chain current(Max.) R3
20mA 9.5 ohms
30mA 6.4 ohms
150mA 1.27 ohms
380mA 0.5 ohms
A 4u7 16V.W. X7R 0805 capacitor is added to board underside between pins 2 , 3 of P2